Furnace Filter IDFilter lookup

Carrier 59SC5B Furnace Filter Size by Return Type

The 59SC5B uses an external filter. Match the installed filter housing first. For the manual’s washable-filter setups, size depends on casing width and return location.

Casing width (in.)Side-return filter (in.)Bottom-return filter (in.)
14 3/1616 × 25 × ¾14 × 25 × ¾
17½16 × 25 × ¾16 × 25 × ¾
2116 × 25 × ¾20 × 25 × ¾
24½16 × 25 × ¾24 × 25 × ¾

These are manual-listed dimensions, not verified retail nominal sizes. Side-return filters can differ; measure the existing filter. A separate media cabinet or return-grille filter needs its own model-specific replacement.

Carrier 59SC5B Installation, Start-up, Operating and Service and Maintenance Instructions, 59SC5B-04SI Rev E, Table 6, p. 18; filter location, p. 57.

Confirm your fit

Side return meets the side of the furnace. Bottom return meets the base.
Illustration for an upright furnace. Follow the return duct to the cabinet opening on your unit.
  1. Match your furnace label to a model pattern below; retain its full voltage and series characters.
  2. Identify the external housing and whether return air enters the furnace from the side or bottom. If unclear, ask your installer.
  3. Read the existing filter label and measure it before ordering. Do not convert ¾ inch to a generic 1-inch product.

Replacement options

Carrier lists these washable filter part numbers in its Product Data accessories table. Verify the installed rack and existing filter first.

Carrier part numberListed dimensions (in.)
325531-40216 × 25 × ¾
325531-40320 × 25 × ¾
325531-40424 × 25 × ¾

The 14 × 25 × ¾-inch bottom-return size is documented in the installation manual. An exact replacement part for that setup has yet to be verified.

For the table’s washable setup, look for the listed dimensions only after checking the rack and existing filter. For a separate media cabinet, use its specified part number.

Covered model patterns and source details

59SC5B026E14--10; 59SC5B040E14--10; 59SC5B040E17--12; 59SC5B060E14--12; 59SC5B060E17--14; 59SC5B080E17--16; 59SC5B080E21--20; 59SC5B100E21--20; 59SC5B100E21--22; 59SC5B120E24--22; 59SC5B140E24--22.

The two dashes preserve the manufacturer’s voltage and minor-series positions; they are not literal label characters. These patterns do not authorize extrapolation to other furnace families.

59SC5B-04SI Rev E, Table 10, p. 24; model nomenclature, p. 67.

Check another modelRequest a match